Water heating has the potential to account for about 12 percent of a family’s utility bill. That being said, it’s not surprising that many homeowners are curious about how to heat their water more efficiently. The following are some actions you can take to save water, energy, and cost.
Turn Down the Thermostat
For every ten degrees you turn down your water heater’s thermostat, you can expect to save about 4% on your bill. While most water heaters come preset at 140 degrees, The U.S. Department of Energy recommends most households lower it to 120 degrees (which should still be high enough for your needs).
Drain the Sediment
Water heater tanks build up sediment, which reduces efficiency as your tank is forced to work harder. Most manufacturers recommend you perform this basic water heater maintenance in Racine, WI, every six months.
Keep Your Tank Insulated
If you have an older tank, installing an insulation blanket is a simple and cheap way to reduce costs. Consider this especially if your tank is located in an unheated area. You can also insulate the first few feet of water pipe that comes from your water heater, so your water loses less heat as it makes its way to you.
Invest in a New Hot Water Heater
Tank water heaters last about 15 years. If yours is reaching the end of its life, consider replacing it. Tankless water heaters cost considerably less to run and maintain, and they supply endless hot water.